TM 5-6115-640-14&P
b.
Installation.
(1)
Perform generator set Installation procedures given in paragraph 5-5b for installment on replacement
trailer.
(2)
Install stowage rack (paragraph 4-26b(2)) if previously removed in a(2) above.
NOTE
For follow-on-maintenance, refer to unit maintenance, Chapter 4, and general instructions
(paragraph 5-1).
5-10. FENDER/FENDER EXTENSION REPLACEMENTS, AN/MJQ-32.
This task covers:
1. Removal
3. Installation
2. Repair
Initial Setup:
1.
Tools - General Mechanics Tool Kit (5180-00-177-7033)
2.
Materials/Parts - Fender/Fender Extension (97403); 13228E9304
- Fender/Fender Extension, Curbside (97403); 13228E9901
WARNING
A minimum of two persons is required to move the fender/ fender extensions due to the bulk and
weight of these items. Failure to do so could result in serious injury. When removing mounting
hardware, use support or hold the fender/fender extensions so they will not drop.
a.
Removal. (See figure 5-5). The fender/fender extension of the modified trailer of the AN/MJQ-32 consists of a
single weldment that includes both fender and fender extensions. The following procedures are the same for either the
curbside or roadside fender/fender extension.
(1)
Removal (Curbside).
(a)
Remove stowage rack (paragraph 4-26b(1)).
(b)
Remove cable-reel bracket (paragraph 4-31b).
(c)
Remove fuel-adapter holder (paragraph 4-33a).
5-11
