5-7. WIRING AND POWER CABLES MAINTENANCE .
Make sure generator sets are shut down before performing any maintenance on wires or cables.
Failure to follow this precaution may result in injury or death by electrocution.
Repair of the wiring and power cables of the switch box is by replacing loose or damaged terminals and wrapping
exposed wires with electrical tape (item 7, Appendix F). Replacement terminals are soldered on the wires in accordance
with procedures given in TB SIG 222 and TM 55-1500-323-25.
Section IV. MAINTENANCE OF ACCESSORY BOX, AN/MJQ-33
5-8. ACCESSORY BOX REPAIR, AN/MJQ-33 ONLY.
This task covers:
Tools - General Mechanics Tool Kit (5180-00-177-7033)
- Drill, 1/4-inch (5130-00-807-3009)
- Riveter, Blind Head (5120-00-148-5847)
Materials/Parts - Catches (96906); MS18015-1
- Strap Fasteners (96906); MS51939-3
- Hinged Hasp/Staple (96906); MS27969-4
- Rivets (96906); MS9460-lU2
The accessory box is repaired by replacing the hasp, the catches, and the strap fasteners, as required. The box itself
may be straightened, welded, and repainted. If required, repaint in accordance with MIL-T-704 and MIL-C-46168.