TM5-6115-640-14&P
(4)
Install four washers (6) and tighten locknuts (7).
(5)
Insert engine oil drain hose (9) through grommet in AN/MJQ-33 trailer bed (8).
(6)
Install four bow assemblies, AN/MJQ-33 (paragraph 3-6b(1)).
(7)
Install tarpaulin, AN/MJQ-33 (paragraph 3-6a(1)).
Section III. MAINTENANCE OF SWITCH BOX
5-6. SWITCH REPLACEMENT.
This task covers:
1. Removal
2. Installation
Initial Setup:
1.
Tools - General Mechanics Tool Kit (5180-00-177-7033)
2.
Materials/Parts - Switch (97403); 13219E9860
WARNING
Make sure generator sets are shut down before performing any maintenance on switch. Failure
to observe this precaution may result in injury or death by electrocution.
NOTE
Compare replacement switch with original switch. Note locations and markings on terminals.
a.
Removal.
(1)
Remove 16 screws (1, figure 5-3), lockwashers (2) and flat washers (3) securing cover (4) to switch box (5) and
pull cover away from switch box.
NOTE
Make sure identification bands on wires are legible before disconnecting wires from switch. Tag
switch terminals and all unmarked wires.
5-5
