TM 5-6115-631-14&P
4-24
(1)
(a)
(b)
(c)
(2) Installation.
Removal.
Remove 16 screws (1, figure 4-12), 16 Iockwashers (2) and 16 flat washers (3) secur-
ing cover (4) to switch box (5) and take cover off switch box
Remove nut (6) and Iockwasher (7) from load terminal stud (8) inside switch box (5).
Slide wire terminal (9) off stud.
NOTE
When removing more than one wire, tag switch terminals for identification.
Remove screw (10), nut (11) and star washer (12) securing wire terminals (13) to
switch terminal (14). Take wire off switch.
(a)
(b)
(c)
NOTE
Observe identification tags on switch terminals when installing wires.
Position wire terminal (13) against underside of switch terminal (14). Insert screw (10)
up through wire terminal and switch terminal. Install star washer (12) and nut (11) on
screw and tighten against switch terminal.
Slide terminal (9) at free end of wire onto load terminal stud (8) and secure with lock-
washer (7) and nut (6).
Position cover (4) on switch box (5) and secure with 16 screws (l), 16 Iockwashers (2)
and 16 flat washers (3).
Figure 4-12. Switch to Load Terminal Wire Replacement.
