TM 5-6115-631-14&P
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
Remove washer (3).
Slide shell (1) off over contact (4).
Cut off contact (4).
NOTE
Be careful not to strip too much insulation from wire. Connector contact must
be crimped onto insulation to hold securely.
Strip insulation off wire lead (2) equal to depth of new contact (4).
Slide shell (1) and washer (3) of new connector onto wire lead (2).
Slide contact (4) onto stripped wire and solder in accordance with TB SIG 222.
Crimp contact onto wire.
Slide shell (1) forward over washer (3) and contact (4).
.
Figure 4-15. Taillight Cable Assembly and Electrical Lead Repair.
b. Female Connector Replacement. (See figure 4-15.)
(1) Slide shell (5) and sleeve (6) back on wire lead (7).
4-28
