TM 5-6115-631-14&P
(2) Cut off contact (8).
(3) Slide shell (5) and sleeve (6) off wire lead (7).
NOTE
Be careful not to strip off too much insulation. Connector contact must be
crimped onto insulation to hold securely.
(4) Strip insulation off wire lead (9) equal to depth of new contact (8).
(5) Slide shell (5) and sleeve (6) onto wire lead (7).
(6) Slide contact (8) onto stripped wire and solder in accordance with TB SIG 222.
(7) Crimp contact onto wire.
(8) Slide shell (5) and sleeve (6) forward over contact (8).
4-29/(4-30 blank)
