TM 5-6115-629-14&P
Figure 4-11. Personnel Platform Replacement.
b. Installation.
NOTE
If mounting brackets have not been removed, omit step (1).
(1) Position each mounting bracket (5) on trailer frame (10). Insert three screws (7) with flat
washers (8) through frame into each bracket. Install one washer (8) and one nut (9) on
each screw and tighten.
(2) Holding platform (4) in vertical position, position platform on mounting brackets (5) so
that holes in platform line up with holes in brackets and install platform anchors (6) in
upper mounting hole on each side of platform.
(3) Secure platform (4) to brackets (5) with two screws (1), four flat washers (2) and two
nuts (3).
4 - 2 6
