TB 9-6115-644-13
14.
Install control unit (1), Figure 5-5, and fuel pump (2) on the outside of the output box using existing hardware:
flatwasher (3), lockwasher (4), and bolt (5). Fuel pump electrical connections will be on the top, which is the output
line to heater.
WARNING
Catch fuel in suitable container. Keep spilled fuel away from hot
engine and all fires. Wash with warm water after getting any on skin.
Fuel is highly flammable and is irritating to skin.
15.
Disconnect generator fuel supply line (11), Figure 5-6, from fuel pickup tube assembly (12). Attach tee fitting (10) to
fuel pickup tube assembly (12) and attach generator fuel supply line (11) to top of tee fitting (10).
NOTE
The proper connection of fuel lines using a hose is a butt joint.
(See Figure 5-6, callouts 2 and 7).
16.
Install adapter (9), Figure 5-6, to tee fitting (10) along with butt splice (7), fuel tubing (8), securing with clamps (6).
17.
Install butt splice (7) with fuel tubing (8) to inlet of pump (4), securing with clamps (6). Attach butt splice (2) and
tubing (3) to outlet from pump (4) and to heater inlet tube, securing with clamps (1).
