TB 9-6115-644-13
4
3
2
5
9
1
8
6
7
4
3
NOTE
Place sealant on threads prior to assembly.
13.
Remove plug from water pump, part of engine, and install elbow (1), Figure 5-4, then stand-off (2). Install 90
preformed side of hose (4) to heater coolant return. Route hose (4) along left side panel above door and attach to
stand-off (2). Secure with clamp (3). Secure hose (4) to left side panel using clamp (5), screw (6), flatwasher (7), lock
washer (8), and nut (9) in hole provided in step 12. If necessary, trim hose (4) to prevent hose from sagging during
operation. Secure end of hose (4) to heater with clamp (3).
