TB 11-6115-741-24
PREVENTATIVE MAINTENANCE
CHECKS AND SERVICES (PMCS)
CHECKLIST
PMCS and Parts Replacement IAW Applicable TMs unless otherwise
Date
specified
Completed
Cooling System
1
Flush cooling system IAW TM 750-254
2
Replace cooling system hoses and thermostat
3
Replace fan belts
Fuel System
4
Replace rubber fuel lines and rubber fuel return lines as specified herein
5
Replace filters and clean/replace strainers
6
If tank is cleaned, replace fuel tank bulk head fittings and gaskets
7
Test fuel injectors
8
Replace primary fuel pumps and auxiliary pumps as specified herein
Intake system
9
Replace air cleaner and breather filters and seals
10
Service/Replace crank case breather screens
11
Test heater/glow plugs and wires
12
Inspect mufflers
On the Mil Std sets, verify proper operation of the shutter assembly IAW TM
13
Control System
14
Replace rotary master switch on 5- 60 kW TQG
15
Replace rotary VM-AM switch on 5-60 kW TQG
16
Replace glass/plastic encased electromagnetic relays
Replace battery charging fuse with circuit breaker kit on the 30/60 kW TQG model B
17
18
Install voltage regulator fuse kit on the 15, 30 and 60 kW TQG model A
19
Install fuse in-line with the convenience receptacle and a new 10A receptacle data plate
(Note: The in-line fuse is not required if a Ground Fault Interrupter NSN 5925-01-493-
9106 is installed.)
20
Install fuse on quad windings going into VR on 5/10 kW TQG
