TB 11-6115-741-24
APPENDIX C (continued)
TIER 1 TECHNICAL INSPECTION CHECKLIST
Tier 1 Technical Inspection
Condition
Check battery compartment for missing,
32
damaged or corroded battery hold down brackets
and rods and battery box tray.
33
Inspect battery cables and connectors for
corrosion and loose, damaged or missing parts.
34
Inspect slave receptacle for loose connections,
damage, corrosion, burning, and missing parts.
35
Inspect output/voltage reconnection box for loose
or damaged wiring or cables.
36
Inspect output/voltage reconnection box
components for damage, looseness, corrosion and
missing components.
Inspect voltage reconnection board for loose
37
wires, burned connections, and missing nuts or
other components.
Inspect load output terminal board for damaged
or missing hardware and components, stripped
38
terminal threads, missing load terminal wrench,
broken wrench retaining cord, and missing nut
retaining clips.
39
Inspect control box for missing, damaged, loose,
corroded, or burned components.
Inspect control box wiring harness for damage,
frayed insulation, loose splices, loose or corroded
40
terminals, and terminals with broken or partially
broken wires.
Push and pull DC circuit breaker listening and
41
contamination.
42
Inspect parallel cable for damage.
43
Inspect switches for smooth operation and signs
44
45
Inspect the engine assembly for loose, damaged
or missing components and wires.
46
Inspect engine breather system for damage,
clogging, and missing and loose components.
47
Inspect engine for damage or missing oil fill cap
and dipstick.. Check dipstick o-ring for
serviceability
Inspect engine for loose or missing freeze plugs,
oil leaks, antifreeze leaks, cracked block, and
48
carbon trails or leaks around exhaust manifolds
and engine head.
C-3