TM 9-6150-228-13&P
4.19 INTERLOCK SOLENOID.
This task covers:
a.
Test
b.
Removal
INITIAL SETUP
Tools
Equipment Conditions
General Mechanic’s Automotive Tool Kit
Reference
(Item 2, Appendix B).
Para. 2.5 Equipment shut down.
Soldering Iron (Item 7, Appendix B).
Heat Gun (Item 8, Appendix B).
Materials/Parts
WARNING
Tags (Item 14, Appendix E).
Sleeving (Item 6, Appendix E)
High voltage is present in this equipment
Solder (Item 7, Appendix E).
during operation. Do not attempt making
Tiedown strap (Item 4, Appendix F, Figure 7).
any repairs without first shutting down all
input power from the power distribution
panel. Failure to observe this warning
Personnel Required
could result in serious injury or death.
One.
REMOVAL
a. Unlock latch (1, Figure 4-11) and remove access door (2) by sliding off of hinge.
b. Tag and identify electrical leads of solenoid interlock
c. Disconnect leads from terminal block
d. Cut sleeving and unsolder leads from fuse holder.
e. Cut and remove tie down strap.
f. Remove two screws (3) and solenoid (4).
INSTALLATION
a. Install solenoid (4) and secure with two screws (3). Tighten screws.
b. Tag and identify electrical leads.
c. Solder lead to fuse holder.
d. Slide sleeving over solder and heat shrink
4-34
