TM 9-6150-228-13&P
5.13
CABLE ASSEMBLIES-CONTINUED.
NOTE
The long pin attaches to the neutral wire of the male connector.
(5)
Slide pins onto cable wires and crimp in place.
e.
Assemble connector.
NOTE
Do not rely on color of wire insulation for phase color-coding. The insulation on the wires inside the cable
may vary depending upon supplier. Wires will be marked with colored tape to designate phases. Perform
continuity test to verify correct phase designation in accordance with colored tape.
Refer to Appendix G to determine correct pin letter and wire code.
Use lubricant (item 3, Appendix E) to aid installation of pins into support group.
(1)
Refer to Appendix G for proper insert tools. Using insert tools (1), insert pins (2) into support group (3).
NOTE
Refer to Appendix G to determine correct pin-to-key position for connector.
5-30
