TM 9-6150-228-13&P
5.13
CABLE ASSEMBLES - CONTINUED.
(3)
Slide connector body (2) down cable and position support group (1) and connector body together.
(4)
Install connector head (3) on connector body (2) and tighten three screws (4).
NOTE
The cable nut (4) is a left-handed thread.
(5)
Slide glands (1 and 2), wire mesh (3), and cable gland nut (4) into body (5) and tighten nut.
(6)
Perform continuity check (Table 4-5) to verify correct assembly.
5-32