TM 9-6150-226-13
5-11 FEEDER/DISTRIBUTION CENTER CONNECTORS. (cont)
1.
2.
3.
DISASSEMBLE THE CONNECTOR.
a.
b.
c.
d.
NOTE
Nut (1) has left-hand
threads.
Remove nut (1) from connector
(2).
Remove wires (3), rear support
group (4), and forward support
group (5).
Remove forward support group
(5) from pins (6).
Use removal tool (Tables 5-3
and 5-4) and remove pins (6)
from rear support group (4).
REPLACE DEFECTIVE PARTS.
Refer to TM 9-6150-226-23P, Appendixes
F for a list of parts.
ASSEMBLE CONNECTOR.
a.
Install wires and pins (6)
into rear support group (4).
NOTE
Pins lock in place.
b.
c.
Position forward support group (5) over pins.
NOTE
o
Ensure position markings on rear and forward
support groups match.
o
Forward support group (5) and connector are keyed
to fit together.
Refer to Figures 5-1 thru 5-4, and install rear support group (4) and
forward support group (5) into connector (2).
5-26
