TM 9-6150-226-13
MAINTENANCE OF FEEDER/DISTRIBUTION CENTERS AND UNIVERSAL ADAPTER
5-12 LATCH.
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Tools
General Mechanic’s Tool Kit
SC 5180-90-CL-N26
Hand Riveter Kit G-749
(Appendix B, Section III, item 6)
General Safety Instructions
WARNING
High voltage is present
system.
DISE and PDISE
equipment using 120/208
not replace a connector
in this
supports
V ac. Do
assembly
with the power on.
Death or -
serious injury may result.
REPLACEMENT
1.
REMOVE LATCH ASSEMBLY.
a.
Drill off rivet head (1).
b.
Use a punch and drive out the
rest of the rivet.
c.
Remove latch assembly (2).
2.
INSTALL LATCH ASSEMBLY.
a.
Position latch over holes in
center.
b.
Install rivets (1) into holes and
fasten with hand riveter.
5-28
