TM 9-6150-226-13
Code
C . . . . . . . . . . . . . .
O. . . . . . . . . . . . . .
F . . . . . . . . . . . . . .
H . . . . . . . . . . . . . .
D. . . . . . . . . . . . . .
Column 5, Tools and Equipment.
common tool sets (not individual tools)
Explanation
Operator or Crew
Organizational (Unit) Maintenance
Direct Support Maintenance
General Support Maintenance
Depot Maintenance
Column 5 specifies, by code, those
and special tools, TMDE, and support
equipment required to perform the designated function.
f.
Column 6, Remarks.
This column shall, when applicable, contain a
letter code,
in alphabetical order which shall be keyed to the remarks
contained in Section IV.
B-4.
COLUMN ENTRIES USED IN TOOL AND TEST EQUIPMENT REQUIREMENTS, SECTION III.
a.
Column 1, Tool or Test Equipment Reference Code.
The tool and test
equipment reference code correlates with a code used in MAC, Section II, Column
5.
b.
Column 2,
Maintenance Level.
The
authorized to use the tool or test equipment.
c.
Column 3, Nomenclature.
Name or ident
equipment.
d.
Column 4, National/NATO Stock Number.
number of the tool or test equipment.
lowest level
of maintenance
ification of the tools or test
The National or NATO stock
e.
Column 5, Tool Number.
The manufacturer’s part number.
B-5.
EXPLANATION OF COLUMNS IN REMARKS, SECTION IV.
a.
Column 1, Reference Code.
The code recorded in column 6, Section
III.
b.
Column 2, Remarks.
This column lists information pertinent to the
maintenance function being performed as indicated in the MAC, Section II.
B-3
