2. REMOVE BUS BAR.

4-17 CIRCUIT BREAKER ASSEMBLY AND BUS BAR.

TM-9-6150-226-13 Generator Set Skid Mounted Tactical Quiet 60 Kw 50/80 and 400 Hz MEP-806B (50/60 Hz) MEP-816B (400Hz) Manual
Page Navigation
138

TM 9-6150-226-13 4-17 CIRCUIT BREAKER ASSEMBLY AND BUS BAR. (cont) a. b. c. d. e. f. NOTE If you have PDISE equip- ment, follow instructions in paragraph 1d, e, f and g. Tag and disconnect wiring from circuit breakers and bus bars. Remove screw (1) securing circuit breaker assembly. Remove circuit breaker assembly (2) from feeder/ distribution center. NOTE M60 A/P has only Phase A. Tag and disconnect wiring J1, A, B and C (3) from circuit breaker 1 (4). Remove screws (5) securing circuit breaker assembly (6). NOTE On model M100 A/P remove circuit breaker 8 for access to mounting screw. Tag and disconnect wiring from circuit breakers 3,4, 5,6,7,8 (7) and J2, A, B and C from bus bars L1, L2 and L3. Tilt circuit breaker assembly (6) clockwise for exposure. 2. REMOVE BUS BAR. NOTE If you have PDISE equip ment, follow instructions in paragraph 2c, d, e, f and g. Change 1 4-49

Privacy Statement
Press Release
Contact