TM 9-6150-226-13
4-17 CIRCUIT BREAKER ASSEMBLY AND BUS BAR. (cont)
f. Refer to tags and connect
wiring to circuit breakers.
Remove tags and torque in
accordance with Table G-1.
TEST
WARNING
High voltage is present
in this system. DISE
and PDISE supports equip-
ment using 120/208 V ac.
Do not attempt continuity
check with the power on.
Death or serious injury
may result.
PERFORM CONTINUITY TEST.
Refer to Table 4-4 and perform
continuity test on the feeder/
distribution center.
FOLLOW-ON MAINTENANCE:
Install cover panel,
circuit breaker panel,
and lanyards (para 4-14).
If you have PDISE equipment.
Follow-On Maintenance:
Install bracket mounting
lights (para. 4-16). Install
cover panel, circuit breaker
panel and lanyards (para 4-14).
4-52
Change 1
