4-17 CIRCUIT BREAKER ASSEMBLY AND BUS BAR.
This task covers:
General Mechanics Automotive Tool Kit
Paragraph 4-14, cover and
circuit breaker panels
removed. PDISE equipment
paragraph 4-16, Phase
Indicator light removed.
High voltage is present in this
system. DISE and PDISE supports
equipment using 120/208 V ac. Do
not replace a connector assembly
with the power on. Death or
serious injury may result.
1. REMOVE CIRCUIT BREAKER ASSEMBLY.
Ground fault circuit breaker
have the panel neutral wire
permanently attached inside
the circuit breaker. Discon-
nect this wire at the bus