TM 9-6115-730-24
DIRECT SUPPORT (FIELD) LEVEL MAINTENANCE
TACTICAL QUIET GENERATOR 200 kW, 50/60 Hz MEP-809A/PU-809A
CRANKSHAFT REAR SEAL CARRIER MAINTENANCE
INITIAL SETUP:
References
Tools and Special Tools
TM 9-6115-730-24P
Shop Equipment, Automotive Maintenance,
Common No. 1 (WP 0123, Item 2)
Shop Equipment, Field Maintenance, Basic
Equipment Condition
(WP 0123, Item 3)
Flywheel removed (WP 0111)
Flywheel housing removed (WP 0113)
Materials/Parts
Cap and plug set (WP 0124, Item 6)
Personnel Required
One
WARNINGS
Metal jewelry will conduct electricity. All jewelry can become entangled in generator set
components. Remove all jewelry when working on generator set. Failure to comply can cause
injury or death to personnel by electrocution.
DO NOT wear loose clothing when performing checks, services and maintenance. Failure to
comply can cause injury or death to personnel.
High voltage is produced when this generator set is in operation. Make sure unit is completely shut
down and free of any power source before attempting any repair or maintenance on the unit.
Failure to comply can cause injury or death to personnel.
High voltage is produced when the generator set is in operation. Never attempt to start or
maintain the generator set unless it is properly grounded. Failure to comply can cause injury or
death to personnel.
CAUTION
All fittings and openings must be capped or plugged immediately after opening to prevent
contamination of the engine.
0114-1
