TM 9-6115-730-24
0113
REMOVAL
1. Attach suitable lifting device to flywheel housing (Figure 1, Item 1).
2. Remove 12 bolts (Figure 1, Item 2), washers (Figure 1, Item 3), flywheel housing (Figure 1, Item 1), and seal
(Figure 1, Item 4).
3. Remove two bolts (Figure 1, Item 5), washers (Figure 1, Item 6), cover (Figure 1, Item 7), and seal (Figure 1,
Item 8).
4. Remove two plugs (Figure 1, Item 9) and seals (Figure 1, Item 10).
5. Remove plug (Figure 1, Item 11), seal (Figure 1, Item 12), plug (Figure 1, Item 13) and seal (Figure 1,
Item 14).
END OF TASK
INSTALLATION
1. Install seal (Figure 1, Item 14), plug (Figure 1, Item 13), seal (Figure 1, Item 12), and plug (Figure 1, Item 11).
2. Install two seals (Figure 1, Item 10) and plugs (Figure 1, Item 9).
3. Install seal (Figure 1, Item 8), cover (Figure 1, Item 7), two washers (Figure 1, Item 6), and bolts (Figure 1,
Item 5).
4. Install seal (Figure 1, Item 4), flywheel housing (Figure 1, Item 1), 12 washers (Figure 1, Item 3) and bolts
(Figure 1, Item 2).
5. Install crankshaft rear seal (WP 0112).
6. Install flywheel (WP 0111).
7. Install magnetic speed pickup (WP 0098).
8. Install starter (WP 0076).
0113-2
