TM 9-6115-730-24
0115
REMOVAL
1. Remove 12 locknuts (Figure 1, Item 1), washers (Figure 1, Item 2), spacers (Figure 1, Item 3), three exhaust
manifolds (Figure 1, Item 4), (Figure 1, Item 5), and (Figure 1, Item 6), and six gaskets (Figure 1, Item 7).
3. Remove 12 studs (Figure 1, Item 8) from cylinder block.
4. If necessary, remove four studs (Figure 1, Item 9) from exhaust manifold (Figure 1, Item 5).
END OF TASK
INSTALLATION
1. If removed, apply antiseize compound to threads of four studs (Figure 1, Item 9) and install in exhaust
manifold (Figure 1, Item 5). Torque studs (Figure 1, Item 9) to 22-30 lb-ft (30-40 Nm).
2. Apply antiseize compound to threads of 12 studs (Figure 1, Item 8) and install in cylinder block. Torque studs
(Figure 1, Item 8) to 22-30 lb-ft (30-40 Nm).
3. Assemble three exhaust manifolds (Figure 1, Item 6), (Figure 1, Item 5), and (Figure 1, Item 4).
4. Install six gaskets (Figure 1, Item 7), three exhaust manifolds (Figure 1, Item 6), (Figure 1, Item 5), and
(Figure 1, Item 4), 12 spacers (Figure 1, Item 3), and washers (Figure 1, Item 2).
5. Apply antiseize compound to threads of 12 locknuts (Figure 1, Item 1) and install on 12 studs (Figure 1,
Item 8). Torque 12 locknuts (Figure 1, Item 1) to 34-48 lb-ft (45-65 Nm).
6. Install turbocharger (WP 0103).
0115-2
