TM 9-6115-729-24
0108
REMOVAL - Continued
3. Remove seven remaining bolts (Figure 1, Item 1) and washers (Figure 1, Item 2).
4. Remove flywheel (Figure 1, Item 3) from crankshaft (Figure 1, Item 4), and remove guide bolt.
END OF TASK
INSTALLATION
1. Apply thread locking compound to threads of eight bolts (Figure 1, Item 1).
2. Install guide bolt in top hole.
3. Align arrows on flywheel (Figure 1, Item 3) and crankshaft (Figure 1, Item 4) and position flywheel (Figure 1,
Item 3).
4. Install seven washers (Figure 1, Item 2) and bolts (Figure 1, Item 1).
5. Remove guide bolt. Install top washer (Figure 1, Item 2) and bolt (Figure 1, Item 1).
6. Torque eight bolts (Figure 1, Item 1) to 75-100 lb-ft (100-140 Nm).
END OF TASK
END OF WORK PACKAGE
