TM 9-6115-729-24
0100
INSTALLATION - Continued
23. Tighten locknut (Figure 1, Sheet 1, Item 5) to 14-22 lb-ft (20-30 Nm).
24. Remove tag and connect ECM to EMCP harness connector P14 to the Magnetic Speed Pickup sensor.
25. Install the turbo outlet pressure sensor (Figure 1, Sheet 2, Item 3) by screwing in.
26. Remove tag and connect engine harness connector ENG-P12 to the turbo outlet pressure sensor.
27. Install the oil temperature sensor (Figure 1, Sheet 1, Item 2). Screw in and torque sensor to 72-108 lb-in
(8-12 Nm).
28. Remove tag and connect engine harness connector ENG-P18 to the oil temperature sensor.
29. Install the injector actuation pressure sensor (Figure 1, Sheet 1, Item 1). Screw in and torque sensor to
72-108 lb-in (8-12 Nm).
30. Remove tag and connect engine harness connector ENG-P13 to the injector actuation pressure sensor.
END OF TASK
END OF WORK PACKAGE
0100-7/8 blank
