ARMY TM 9-6115-673-13&P
AIR FORCE TO 35C2-3-512-1
ENGINE
ADAPTER
WASHER
LOCKWASHER
SET
FLEXIBLE
BOLT
SCREWS
FLANGE
COUPLING
WASHER
SCREW
SLEEVE
KEY
COUPLING
WASHER
CAP
CRANKSHAFT
SCREW
ADAPTER
WASHER
NUT,
GUARD
SELF-LOCKING
CAP
SCREW
WASHER
CAPSCREW
LOCKWASHER
GROUND
STRAP
WASHER
(5)
Remove bolts, lockwashers, washers, and engine adapter from engine.
(6)
Loosen setscrews and remove flexible flange coupling from crankshaft adapter using standard gear
puller.
(7)
If crankshaft adapter is damaged, apply heat to screw and remove screw and countersunk washer
securing crankshaft adapter. Then apply heat to crankshaft adapter and using a suitable gear puller,
remove crankshaft adapter from crankshaft. Discard screw, machine key, and adapter.
b. Disassembly.
(1)
Hold rotor shaft from turning using an allen wrench inserted in end of shaft, and remove nut and
lockwasher from rotor shaft (Figure 5-42).
(2)
Loosen setscrews securing drive pulley to rotor shaft. Then using suitable puller, remove drive pulley.
It may be necessary to gently tap the outside diameter of the pulley with a plastic mallet.
(3)
Remove key, fan, and bushing.
