ARMY TM 9-6115-673-13&P
AIR FORCE TO 35C2-3-512-1
AC ALTERNATOR BEARING. (MEP-531A)
a. Removal.
(1)
Remove control panel assembly, refer to paragraph 4.20.b.
(2)
Remove bolts (Figure 5-40), lockwashers, washers and alternator guard from alternator.
(3)
Tag and disconnect electrical leads secured by screws.
(4)
Remove nuts, lockwashers, washers, bolts, and bearing bracket from alternator.
(5)
Using suitable puller, pull bearing from alternator rotor.
b. Installation.
(1)
Press bearing (Figure 5-40) into alternator rotor.
(2)
With the vertical portion of the "Y" positioned at the bottom, align bearing bracket (16, Figure 5-39) to
the stator assembly lip and the stub shaft with inner race of bearing (29).
KEPS NUT
BEARING
LEAD
GUARD
SCREW
WASHER
NUT
BEARING
LOCKWASHER
BRACKET
WASHER
WASHER
BOLT
LOCKWASHER
BOLT
