ARMY TM 9-6115-673-13&P
AIR FORCE TO 35C2-3-512-1
Repair.
WARNING
CARC paint dust is a health hazard. Wear protective eyewear,
mask, and gloves when sanding CARC painted surfaces.
Failure to comply can cause personal injury.
(1) Repair all dents and cracks, and remove all loose paint.
(2) Remove light corrosion with fine grit abrasive paper (Item 16, Appendix E).
(3) Repaint surface in accordance with TM 43-0139/TO 35-1-3.
d.
Installation.
(1) If removed, install edge protector (Figure 4-45) on lug cover with contact adhesive
(Item 2, Appendix E). Follow manufacturer's instructions for application of contact
adhesive.
(2) If removed, install identification plate on lug cover with new rivets.
RIVET
LUG COVER
IDENTIFICATION
PLATE
RIVET
RIVET
OP
ER
ATI
NG
INS
TR
UC
TIO
NS
OPERATING
INSTRUCTION
PLATE
EDGE
CA
UTI
120 ON
VAC
PROTECTOR
FASTENER
4-111
