ARMY TM 9-6115-672-14
AIR FORCE TO 35C2-3-444-32
MARINE CORPS TM 09244A/09245A-14
4-167
(6)
Pivot alternator to relieve tension on fan belt (1), and remove belt from alternator pulley (2),
crankshaft pulley (3), and fan pulley (6).
(7)
Slip fan belt (1) over fan (40, Figure 4-22), and remove fan belt from generator set.
(8)
Slip fan belt (1, Figure 4-24) over fan (40, Figure 4-22).
(9)
Install fan belt (1, Figure 4-24) onto from alternator pulley (2), crankshaft pulley (3), and fan pulley
(6).
(10) Adjust tension on fan belt (1), step b above.
(11) Install fan guards, paragraph 4.10.3.
(12) Close engine compartment access doors.
(13) Connect negative battery cable to battery, and close BATTERY ACCESS door.
4.10.10 Coolant Recovery System.
a. Inspection.
(1)
Shut down generator set, paragraph 2.11.2.
(2)
Open right side engine compartment access doors (Figure 1-2).
(3)
Inspect coolant recovery system components for cracks, holes, or other damage.
(4)
Replace damaged parts.
(5)
Close engine compartment access doors.
b. Removal.
(1)
Shut down generator set, paragraph 2.11.2.
(2)
Open right side engine compartment access doors (Figure 1-2).
__________
WARNING
Cooling system operates at high temperature and pressure. Contact with high
pressure steam and/or liquids can result in burns and scalding. Shut down
generator set, and allow system to cool before performing checks, services, and
maintenance. Failure to comply can cause injury to personnel.
(3)
Loosen hose clamp (1, Figure 4-25). Disconnect hose (2) from overflow bottle (5), and drain
coolant into suitable container.
(4)
Loosen hose clamp (3), and disconnect hose (4) from overflow bottle (5).
(5)
Remove overflow bottle (5) from wire holder (11).
(6)
Remove nuts (6), lockwashers (7), washers (8), washers (10), bolts (9), and wire holder (11) from
mounting bracket (14).
