ARMY TM 9-6115-672-14
AIR FORCE TO 35C2-3-444-32
MARINE CORPS TM 09244A/09245A-14
4-165
FIGURE 4-24. FAN BELT
(3)
Secure fan (40) and spacer (41) to engine water pump with lockwashers (39) and bolts (38). Torque
bolts to 24 ft-lb (32 Nm).
(4)
Install shroud (19), washers (18), lockwashers (17), and bolts (16).
(5)
Install fan guards, paragraph 4.10.3.
(6)
Connect negative battery cable to battery, and close BATTERY ACCESS door.
4.10.9 Fan Belt.
a. Inspection.
(1)
Shut down generator set, paragraph 2.11.2.
(2)
Open BATTERY ACCESS door (Figure 1-2).
(3)
Disconnect negative battery cable.
(4)
Open engine compartment access doors (Figures 1-2 and 1-3).
(5)
Remove fan guards, paragraph 4.10.3
(6)
Inspect fan belt (1, Figure 4-24) for fraying, cracks, oil soaking or other damage.
(7)
Replace fan belt that shows any damage or cannot be adjusted for proper tension.
