ARMY TM 9-6115-672-14
AIR FORCE TO 35C2-3-444-32
MARINE CORPS TM 09244A/09245A-14
4-72
(2)
Install SLAVE RECEPTACLE box (53), bolts (52), and locknuts (51) on front housing (14).
(3)
Install support channel (50), bolts (49), and locknuts (48) on front housing (14).
(4)
Install support (47), bolts (46), and locknuts (45) on panel (44).
(5)
Install panel (44), washers (43), lockwashers (42), and bolts (41) on front housing (14).
(6)
Install supports (39 and 40), bolts (38), and locknuts (37) on radiator panels (35 and 36).
(7)
Install radiator panels (35 and 36), washers (34), lockwashers (33), and bolts (32) on front housing
(14).
(8)
Install air deflector (31), washers (30), lockwashers (29), and bolts (28) on front housing (14).
(9)
Secure air deflector (31) to front housing (14) with bolts (27) and locknuts (26).
(10) Install insulation (25) on front housing (14) with panel clips (24), clip halves (63), and push-on nuts
(64).
(11) Install door sills (22 and 23), washers (21), lockwashers (20), and bolts (19) on skid base.
(12) Secure door sills (22 and 23) to generator set with bolts (18), washers (17), lockwashers (16), and
nuts (15).
(13) Install front housing (14), washers (13), lockwashers (12), and bolts (11) on skid base.
(14) Secure front housing (14) to skid base with bolts (10), washers (9), lockwashers (8), and nuts (7).
(15) Install bolts (6), washers (5), lockwashers (4), and nuts (3) on front housing (14) and door sills (22
and 23).
(16) Position ground rod sections (2) in brackets (56), and install bolts (l).
(17) Install top housing section, paragraph 4.6.3.
(18) Install engine compartment access doors. Refer to paragraph 4.6.1.
(19) Install BATTERY ACCESS door. Refer to paragraph 4.6.1.
(20) Install NATO SLAVE RECEPTACLE, paragraph 4.5.4, and batteries, paragraph 4.5.3.
4.7.5
Rear Housing Section.
a. Removal.
(1)
Shut down generator set, paragraph 2.11.2.
(2)
Remove DCS control box assembly, paragraph 4.8.1.
(3)
Remove air cleaner assembly, paragraph 4.9.2.
