ARMY TM 9-6115-672-14
AIR FORCE TO 35C2-3-444-32
MARINE CORPS TM 09244A/09245A-14
4-68
(7)
Install support (41), bolts (40), and locknuts (39) on front panel (38).
(8)
Install front panel (38), bolts (37), and locknuts (36) on floor panel (35).
(9)
Position side panels (33 and 34) with floor panel (35) on generator set.
(10) Secure front panel (38) to generator set with washers (32), lockwashers (31), and bolts (30).
(11) Secure side panels (33 and 34) to generator set with bolts (29) and locknuts (28).
(12) Install duct panel (27), bolts (24 and 26), and locknuts (23 and 25) on floor panel (35) and side
panels (33 and 34).
(13) Install air duct channels (21 and 22), washers (20), lockwashers (19), and bolts (18) on floor panel
(35).
(14) Install muffler, paragraph 4.9.1.
(15) Install roof stiffener (17), washers (16), lockwashers (15), and bolts (14) on side panels (33 and 34).
(16) Position radiator fill panel (13) on generator set, and connect radiator fill hose and overflow hose to
panel.
(17) Install top housing panel (12), washers (8 and 11), lockwashers (7 and 10), and bolts (6 and 9) on
generator set.
(18) Install exhaust cover (5), mount (4), washers (3), lockwashers (2), and bolts (1) on top housing
panel (12).
(19) Install DCS control box top panel, paragraph 4.7.2.
(20) Connect negative battery cable to battery, and close BATTERY ACCESS door.
4.7.4
Front Housing Section.
a. Removal.
(1)
Shut down generator set, paragraph 2.11.2.
(2)
Remove BATTERY ACCESS door. Refer to paragraph 4.7.1. Remove batteries, paragraph 4.6.3,
and NATO SLAVE RECEPTACLE, paragraph 4.6.4.
(3)
Remove engine compartment access doors. Refer to paragraph 4.7.1.
(4)
Remove top housing section, paragraph 4.7.3.
(5)
Remove bolts (1, figure 4-8) and ground rod sections (2) from brackets (56).
(6)
Remove nuts (3), lockwashers (4), washers (5), and bolts (6) from door sills (22 and 23) and front
housing (14).