ARMY TM 9-6115-672-14
AIR FORCE TO 35C2-3-444-32
MARINE CORPS TM 09244A/09245A-14
4-77
(2)
Remove light corrosion with fine grit abrasive paper (Item 16, Appendix E).
(3)
Repaint surfaces in accordance with TM 43-0139.
(4)
Replace stripped or cracked cage nuts (72 through 76, Figure 4-9).
(5)
Replace damaged insulation (10,30,41,69,71) and missing or damaged clip halves
(9,29,40,68,70,76,78,80,82,84) or push-on nuts (77,79,81,83,85).
(6)
Replace damaged door seals (87 through 90) attach with adhesive (1, Appendix E).
(7)
Using adhesive (1, Appendix E), replace loose or damaged EMI seals (86). Ensure closed side of
seal faces outward.
(8)
Replace damaged or unreadable data plates (92 and 94) and loose or missing rivets (91 and 93).
d. Installation.
(1)
Install insulation (71) and clip halves (70) to panel (64).
(2)
Install insulation (69) and clip halves (68) to air baffle (67).
(3)
Install air baffle (67), bolts (66), and locknuts (65) to panel (64).
(4)
Install panel (64) to skid base using bolts (61), lockwashers (62), and washers (63).
(5)
Install bolts (60), washers (59), lockwashers (58), and nuts (57) to panel (64).
(6)
Install corner post (54), door sill (53) on skid base using bolts (52), washers (51), lockwashers (50),
and nuts (49).
(7)
Apply industrial sealant (18, Appendix E) to edges and cracks at mating surfaces of corner post
(54), panel (64), and control box top.
(8)
Secure door sill (53) to corner post (54) and panel (64) with bolts (48) and locknuts (47).
(9)
Install output box sill (46), bolts (45), and locknuts (44) on corner post (54) and panel (64).
(10) Install insulation (41) and clip halves (40) to left side rear panel (25).
(11) Install document box top (39), bolts (38) and locknuts (37) to left side rear panel (25).
(12) Install filler neck panel (36), bolts (35), and locknuts (34) on left side rear panel (25).
(13) Install support bracket (33), bolts (32), and locknuts (31) to left side rear panel (25).
(14) Install insulation (30) on air baffle (28) with clip halves (29).
(15) Install air baffle (28), bolts (27), and locknuts (26) on left side rear panel (25).
(16) Secure left side rear panel (25) to skid base with bolts (22), lockwashers (23), and washers (24).
(17) Install bolt (21), washer (20), lockwasher (19), and nut (18) to left side rear panel (25).
