ARMY TM 9-6115-672-14
AIR FORCE TO 35C2-3-444-32
MARINE CORPS TM 09244A/09245A-14
4-79
4.8.1
DCS Control Box .
a. Inspection.
(1)
Shut down generator set, paragraph 2.11.2.
(2)
Inspect DCS control box for cracks, breaks, corrosion, loose paint, and missing parts.
b. Removal.
(1)
Shut down generator set, paragraph 2.11.2.
(2)
Open BATTERY ACCESS door (Figure 1-2), and disconnect negative battery cable.
(3)
Remove DCS control box top panel, paragraph 4.7.2.
(4)
Remove bolts (1, Figure 4-10), lockwashers (2), and washers (3) securing DCS control box
assembly (12) to top of output box assembly (Figure 5-3).
(5)
Open output box access door (Figure 1-2).
(6)
Remove locknuts (4, Figure 4-10) and bolts (5) securing DCS control box assembly (12) to
generator set.
(7)
Remove bolts (6 and 9), lockwashers (7 and 10), and washers (8 and 11).
(8)
Slide DCS control box forward, disconnect two wiring harness connectors at rear of DCS control
box assembly (12, Figure 4-10) and remove DCS control box assembly (12) from generator set.
c.
Repair
Repair DCS control box assembly by replacing damaged terminals, damaged or missing mounting
hardware, and damaged or defective components. Refer to paragraphs 4.8.2 through 4.8.43.
d.
Installation.
(1)
Install DCS control box assembly (12) to generator set by sliding DCS control box backward, and
connecting two wiring harness connectors at rear of DCS control box assembly (12, Figure 4-10).
(2)
Secure DCS control box assembly (12) to generator set with bolts (6 and 9), lockwashers (7 and 10),
and washers (8 and 11).
(3)
Install bolts (5) and locknuts (4).
(4)
Close output box access door (Figure 1-2).
(5)
Secure DCS control box assembly (12, Figure 4-10) to top of output box assembly with washers (3),
lockwashers (2), and bolts (1).
(6)
Connect two wiring harness connectors at rear of DCS control box assembly (12).
(7)
Install DCS control box top panel, paragraph 4.7.2.
