ARMY TM 9-6115-671-14
AIR FORCE TO 35C2-3-446-32
MARINE CORPS TM 09249A/09246A-14
5-27
c. Installation.
(1)
Uncover openings in fuel tank (7, Figure 5-2).
(2)
Apply sealing compound (Item 22, Appendix E) to threads of fitting studs (10). Install bushings
(12), washers (11), and fitting studs on fuel tank (7). Torque fitting studs to 40 inch-pounds.
(3)
Apply sealing compound (Item 22, Appendix E) to threads of tee (9). Install tee on fitting stud
(10) on left side of fuel tank (7).
(4)
Apply sealing compound (Item 22, Appendix E) to threads of fittings (8). Install fittings on
fitting studs (10) on right side of fuel tank (7).
(5)
Apply sealing compound (Item 22, Appendix E) to threads of fitting (13). Install fitting on tee
(9) on left side of fuel tank (7).
(6)
Install fuel pickup, paragraph 4.11.6.
(7)
Install fuel level sender, paragraph 4.11.5.
(8)
Position fuel tank (7) in skid base.
(9)
Secure fuel tank (7) to skid base with holddown assemblies (6), washers (5), bolts (4), washers
(3), lockwashers (2), and bolts (1).
(10) Install fuel drain valve, paragraph 4.11.4.
(11) Install engine and generator assembly, paragraph 5.4.2.
(12) Service fuel tank. Refer to Table 4-1 for proper fuel.
(13) Connect negative battery cable to battery, and close BATTERY ACCESS door.
