ARMY TM 9-6115-671-14
AIR FORCE TO 35C2-3-446-32
MARINE CORPS TM 09249A/09246A-14
5-26
(3)
Remove cap (28), Figure 4-25), open fuel drain valve (30), and drain fuel into a suitable
container.
(4)
Remove engine and generator assembly, paragraph 5.4.2.
(5)
Remove fuel drain valve, paragraph 4.11.4.
(6)
Remove nuts (1, Figure 5-2), lockwashers (2), washers (3), bolts (4), washers (5), and holddown
assemblies (6) securing fuel tank (7) to skid base.
(7)
Lift fuel tank (7) from skid base.
(8)
Remove fuel level sender, paragraph 4.11.5.
(9)
Remove fuel pickup, paragraph 4.11.6.
(10) Remove fittings (8) from fitting studs (10) on right side of fuel tank (7).
(11) Remove fitting (13) from tee (9).
(12) Remove tee (9) from fitting stud (10) on left side of tank (7).
(13) Remove fittings studs (10), washers (11), and bushings (12) from fuel tank (7).
(14) Cover all openings in fuel tank (7).
b. Inspection.
(1)
Shut down generator set, paragraph 2.11.2.
(2)
Remove fuel tank, step 5.7.1a .
(3)
Inspect fuel tank (7, Figure 5-2) for leaks, cracks, missing hardware, and other damage.
(4)
If damage is found, replace fuel tank (7).
(5)
Install fuel tank, step 5.7.1c.
