TM 9-6115-670-14&P
5-47
REPLACE
a. Tag and remove electrical leads from terminals L1, L2, and L3 of overload relay (2, Figure 5-10)
by loosening three screws.
b. Remove two nuts with captive washers (1) and two bolts (4) and remove overload relay (2)
from contactor mounting plate (3).
c. Install overload relay (2) on contactor mounting plate (3) and secure with two bolts (4) and nuts
with captive washers (1).
d. Reconnect electrical leads to terminals L1, L2, and L3 of overload relay (2) and secure with
three screws.
Figure 5-10. Overload Relay