TM 9-6115-670-14&P
5-51
e. Install relay board (6) on vibration mounts (3) and secure with six nuts with captive washers (8)
(JTACS), or six screws, flat washers, lock washers, vibration mounts and hex nuts (SICPS and
WIN-T).
f. Reconnect electrical leads to relay board (6). Remove tags.
g. Install generator housing side cover (4) and secure with four screws (JTACS), or slotted hex-
head bolts (SICPS and WIN-T), flat and lock washers (5).
h. Install generator housing top cover (2) and secure with four screws (JTACS), or slotted hex-
head bolts (SICPS and WIN-T), flat and lock washers (1).
