ARMY TM 9-6115-670-14&P
5-48
5.17. CONTACTOR PLATE.
This task covers: Replace
INITIAL SETUP
Tools
General Mechanic's Tool Kit
(Item 1, Appendix B)
Equipment Conditions
APU DC Box Wiring Harness J3 removed (para
5.26.).
Wiring Harness J1 removed (para 5.28.).
Materials/Parts
Contactor Plate
Contactor Mounting Plate removed (para 4.52.).
Electrical Output Terminal Board removed (para
4.51.).
REPLACE
a. Remove ten screws, or slotted hex-head bolts, lock washers and washers (SICPS) (4, Figure
5-11) securing contactor plate (2) to generator housing (3).
b. Remove four bolts and lock washers (1) securing contactor plate (2) to generator (5). Remove
contactor plate (2).
c. Install contactor plate (2) on generator (5) using four bolts and lock washers (1).
d. Secure contactor plate (2) to generator housing with ten screws, or slotted hex-head bolts, lock
washers and washers (SICPS) (4).
