ARMY TM 9-6115-670-14&P
5-56
REPLACE
a. Remove four screws (JTACS), or slotted hex-head bolts (SICPS and WIN-T), flat and lock
washers (4, Figure 5-14), and generator housing top cover (3).
b. Remove two screws, wing nuts and lock washers (6a) (JTACS), or four slotted hex-head bolts
(SICPS and WIN-T), flat and lock washers (6), and generator housing side cover (5) (muffler
side).
c. Remove electromagnetic safety relay (1) from relay socket (2).
d. Install electromagnetic safety relay (1) into relay socket (2).
e. Install generator housing side cover (5) and secure with two screws, wing nuts and lock
washers (6a) (JTACS), or four slotted hex-head bolts (SICPS and WIN-T), flat and lock
washers (6).
f. Install generator housing top cover (3) and secure with four screws (JTACS), or slotted hex-
head bolts (SICPS and WIN-T), flat and lock washers (4).
