TM 9-6115-647-14&P
b.
Repair Repair of the storage tray and cover is limited to straightening, welding and repainting. If
required, repaint in accordance with MIL-T-704, Type G, Color Green, No 383 of MIL-C-46168. If
power unit is painted in camouflage, refer to Section VI, Power Unit Marking.
c.
Installation .
NOTE
If storage tray was not being removed, omit step (1).
(1)
Position storage tray (2) on trailer cross-members (11) and fasten with six screws (8), twelve
flat washers (9) and six self-locking nuts (10). Make sure open end of storage tray is at rear.
(2)
Position storage tray cover (6) on underside of rear and rear middle generator supports (7) so
that mounting holes in cover align with mounting holes in generator support ears. Install 20
screws (3), 20 flat washers (4) and 20 self-locking nuts (5).
(3)
Place accessories in storage tray (6).
(4)
Raise and secure tailgate (1), if required.
(5)
Install generator set (paragraph 5-2).
5-23
