TM 9-6115-647-14&P
5-19. Power Distribution Unit Marking . (See figure 5-15 ) "J1", "J6" and "J10" are marked next to their
respective connectors on the inside and the outside of the PDU housing. Underneath connector J1, "97403
Assy 13227E5855" is marked on the outside of the housing. "E1" is marked next to the ground stud on the
inside and outside of the housing. "CR1", "CR2", "CR3", "CR4", "K1", "K2", "K3" and "TB1" are marked next to
their respective components inside the housing. Figure 5-15 shows the location of PDU external markings.
Figure 5-15. Power Distribution Unit Marking.
5-28
