TM 9-6115-647-14&P
APPENDIX B
COMPONENTS OF END ITEM AND BASIC ISSUE ITEMS LISTS
Section I. INTRODUCTION
B-1. Scope. This appendix lists components of end item and basic issue items for the power unit to help you
inventory items required for safe and efficient operation.
B-2. General. The Components of End Item and Basic Issue Items lists are divided Into the following sections.
a.
Section II Components of End Item. This listing is for informational purposes only, and is not
authority to requisition replacements. These items are part of the end item, but are removed and
separately packaged for transportation or shipment. As part of the end item, these items must be
with the end item whenever it is issued or transferred between property accounts. Illustrations are
furnished to assist you in identifying the items.
b
Section III. Basic Issue Items . These are the minimum essential items required to place the
power unit in operation, to operate it, and to perform emergency repairs . Although shipped
separately packaged, BII must be with the power unit during operation and whenever it is transferred
between property accounts. The illustrations will assist you with hard-to-identify items. This manual
is your authority to request/requisition Bll, based on TOE/MTOE authorization of the end item.
B-3. Explanation of Columns . The following provides an explanation of columns found in the tabular listings.
a.
Column (1), Illustration Number (Illus No.) . This column indicates the number assigned to the
item.
b.
Column (2). National Stock Number . Indicates the National stock number assigned to the item.
c.
Column (3). Description . Indicates the federal item name and, if required, a minimum description
to identify and locate the item. The last line for each item indicates the CAGE (in parentheses)
followed by the part number. If item needed differed for different models of this equipment, the
model would be shown under the "Usable on Code" heading in this column. The Usable on Code is
not applicable for this equipment.
d.
Column (4). Unit of Measure (U/M). Indicates the measure used in performing the actual
operational/ maintenance function. This measure is expressed by a two-character alphabetical
abbreviation (e.g., ea., in, pr).
e
Column (5). Quantity Required (Qty Req’d). Indicates the quantity of the item authorized to be
used with/on the equipment.
B-1
