ARMY TM 9-6115-45-24
AIR FORCE TO 35C2-3-444-12
MARINE CORPS TM 09244A/09245A-24/2
SECTION X. MAINTENANCE OF CONTROL BOX ASSEMBLY
2-19 . CONTROL BOX ASSEMBLY.
2-1 9.1 Inspection.
a.
Shut down generator set.
b.
Inspect control box assembly for cracks, breaks, corrosion, loose paint, and missing parts.
21 9.2 Removal.
a.
Shut down generator set.
b. Open battery access door and disconnect negative battery cable.
c.
Remove control box top panel, paragraph 2-15.1.
d. Open output box access door and disconnect two control box harness connectors.
e.
Remove bolts (1 and 5, FIGURE 2-10), Iockwashers (2), flatwashers (3), nuts (4), and control box assembly
(6) from generator set.
2-1 9.3 Repair.
Repair control box assembly by replacing damaged terminals, damaged or missing hardware, and damaged or defec-
tive components.
2-1
9.4
Installation.
a.
Install control box assembly (6, FIGURE 2-10) on generator set with bolts (1) and (5), flatwashers (3), lock-
washers (2), and nuts (4).
b. Connect two control box harness connectors.
c. Install control box top panel, paragraph 2-15.4.
d. Connect negative battery cable. Close battery access door.
2-47