ARMY TM 9-6115-645-24
AIR FORCE TO 35C2-3-444-12
MARINE CORPS TM 09244A/09245A-24/2
2-72
AIR RESTRICTION INDICATOR.
2-72.1 Inspection.
a.
Shut down generator set.
b. Open left side engine access doors.
WARNING
The exhaust system can get very hot. Allow system to cool before checking Air
Restriction indicator. Failure to follow those instructions could result in severe
burns and injuries.
c.
Inspect air restriction indicator (1, FIGURE 2-21) for cracks, stripped threads, or other obvious damage.
d. Close engine access doors.
2–72.2 Removal.
a.
Shut down generator set.
b. Open left side engine access doors.
c.
Unscrew air restriction indicator (1, FIGURE 2–21 ) from air cleaner housing (7).
2–72.3 Installation.
a.
Install air restriction indicator (1, FIGURE 2–21) on air cleaner housing (7). Tighten hand tight only.
b. Close engine access doors.
2-73 AIR CLEANER ASSEMBLY.
2–73.1
a.
b.
c.
d.
e.
f.
2-73.2
a.
b.
c.
2-73.3
a.
b.
c.
d.
e.
f.
2-104
lnspection.
Shut down generator set.
Open battery access door and disconnect negative battery cable.
Remove control box assembly, paragraph 2–1 9.2.
Inspect air cleaner assembly and mounting bracket for cracks, dents, and other damage (FIGURE 2-21).
Install control box assembly, paragraph 2-19.4.
Connect negative battery cable. Close battery access door.
Service.
Remove air cleaner element, paragraph 2-74.1.
Wipe inside of air cleaner housing with cleaning cloth (Item 8, Appendix C).
Install new air cleaner element, paragraph 2-74.3.
Removal.
Shut down generator set.
Open battery access door and disconnect negative battery cable.
Remove control box assembly, paragraph 2-19.2.
Loosen clamp (2, FIGURE 2–21) and remove hose (15) from air cleaner housing (7).
Remove bolts (3), washers (4), Iockwashers (5), nuts (6), mounting bracket (11), and air cleaner assembly from
generator set.
Remove bolts (8), nuts (10), Iockwashers (9), and mounting bracket (11) from air cleaner assembly.
