ARMY TM 9-6115-645-24
AIR FORCE TO 35C2-3-444-12
MARINE CORPS TM 09244A/09245A-24/2
2-73.4 Installation.
a.
Install mounting bracket (11, FIGURE 2-21) on air cleaner assembly with bolts (8), Iockwashers (9), and nuts
(10).
b. Install aircleaner assembly and mounting bracket (11) on generator set with bolts (3), washers (4), Iockwashers
(5), and nuts (6).
c.
Install hose (15) and clamp (2) on air cleaner housing (7). Tighten clamp (2).
d. Install control box assembly, paragraph 2-19.4.
e.
Connect negative battery cable. Close battery access door.
2-74 AIR FILTER ELEMENT.
2-74.1
a.
b.
c.
d.
2-74.2
a.
b.
c.
d.
e.
2-74.3
a.
b.
c.
Removal.
Shut down generator set.
Open air cleaner access door.
Loosen wing nut caged to cover (12, FIGURE 2-21) and remove cover (12) from air cleaner housing (7).
Remove wing nut (13) and filter element (14) from air cleaner housing (7).
Inspection.
Shut down generator set.
Remove air cleaner element, paragraph 2-74.1.
Inspect element (14, FIGURE 2-21) for debris and damage, replace as necessary.
Wipe inside of air cleaner housing (7) with clean cloth (Item 8, Appendix C).
Install air cleaner element, paragraph 2-74.3.
Installation.
Install filter element (14, FIGURE 2-21) in air cleaner housing (7) and tighten wing nut (1 3).
Install cover (12) on air cleaner housing (7), tighten caged wing nut.
Close air cleaner access door.
2-75 AIR CLEANER TUBING AND BREATHER.
2-75.1
a.
b.
c.
d.
e.
f.
g.
h.
i.
j.
k.
Inspection.
Shut down generator set.
Open engine access doors.
Inspect all tubing for cracks, tears, and holes,
Inspect clamps for cracks.
Inspect breather and cover for dents, cracks, and corrosion.
Remove wing nut (21, FIGURE 2-21), washer (22), cover (23), rubber seal (24), and element (25) from breather
(20).
Inspect breather element for clogs, tears, or other damage.
Inspect threaded parts for damaged or stripped threads.
Replace parts as necessary.
Install element (25), rubber seal (24), cover (23), washer (22), and wing nut (21 ) on breather (20).
Close engine access doors.
2-106
