ARMY TM 9-6115-645-24
AIR FORCE TO 35C2-3-444-12
MARINE CORPS TM 09244A/06245A-24/2
2-75.2
a.
b.
c.
d.
2-75.3
a.
b.
c.
d.
e.
f.
g.
h.
i.
2-75.4
a.
b.
c.
d.
e.
f.
g.
h.
i.
Service.
Remove air cleaner tubing and breather, paragraph 2-75.3.
WARNING
Dry cleaning solvent is flammable and toxic to eyes, skin, and respiratory tract.
Skin/eye protection required. Avoid repeated/prolonged contact. Good general
ventilation is normally adequate.
Clean air cleaner tubing and breather housing with clean lint-free cloth (Item 8, Appendix C) dampened with
dry cleaning solvent (Item 20, Appendix C).
Replace breather element.
Install air cleaner tubing and breather, paragraph 2-75.4.
Removal.
Shut down generator set.
Open engine access doors.
Loosen damps (2 and 18, FIGURE 2-21).
Remove hose (15) from air cleaner housing (7) and tube (16).
Remove tube (16) from breather hose (19) and hump hose (17).
Remove hump hose (17) from turbocharger.
Remove breather hose (19) from breather (20).
Remove breather (20) from valve cover.
Remove wing nut (21 ), washer (22), rover (23), rubber seal (24), and element (25) from breather (20).
InstalIation.
Install element (25, FIGURE 2-21), rubber seal (24), cover (23), washer (22), and wing nut (21) on breather
(20).
Install breather (20) in valve cover.
Install hose (19) and clamp (18) on breather (20).
Install hump hose (17) and damp (2) on turbocharger.
Install tube (16) and damp (2) on hump hose (17).
Install breather hose (19) and clamp (18) on tube (16).
Install hose (15) and clamps (2) on tube (16) and air cleaner housing (7).
Tighten damps (2) and (18).
Close engine access doors.
2-107
