ARMY TM 9-6115-644-24
AIR FORCE TO 35C2-3-446-12
MARINE CORPS TM 09249A/09246A-24/2
2-89 FUEL DRAIN VALVE
2-89-1
a.
b.
c.
d.
e.
f.
g.
h.
2-89-2
a.
b.
c.
d.
e.
f.
g.
Removal.
Shut down generator set.
Open battery access door and disconnect negative battery cable.
Open left side engine access doors.
Remove cap and chain assembly (27, FIGURE 2-26) from adapter (28).
WARNING
Diesel fuel is flammable and toxic to eyes, skin, and respiratory tract. Skin/eye protection
required. Avoid repeated/prolonged contact. Good general ventilation is normally ade-
quate.
Open drain valve (29) and drain fuel into suitable container.
Remove drain valve (29) and adapter (28) from elbow (30).
Remove adapter (28) from drain valve (29).
If necessary, remove elbow (30) and adapter (31) from fuel tank fitting.
Installation.
If removed, install adapter (31, FIGURE 2-26) and elbow (30) in fuel tank fitting.
Install fuel drain valve (29) into elbow (30).
Install adapter (28) into drain valve (29), and cap and chain assembly (27) on adapter (28).
Ensure fuel drain valve (29) is closed and service fuel tank. Refer to TABLE 2-2 for proper fuel.
Check fuel drain valve and fittings for leakage.
Close left side engine access doors.
Connect negative battery cable and dose battery access door.
2-90 FUEL LEVEL SENDER.
2-90-1
a.
b.
c.
d.
2-90-2
a.
b.
c.
Inspection.
Shut down generator set.
Open left side engine access doors.
Inspect fuel level sender (35, FIGURE 2-26) for loose connections and mounting, and other damage.
Close engine access doors.
Removal.
Shut down generator set.
Open battery access door and disconnect negative battery cable.
Open left side engine access doors and disconnect fuel level sender (35, FIGURE 2-26) electrical lead.
2-133
