TM 9-6115-643-10 ARMY
TO 35C2-3-445-21 AIR FORCE
2-5 P MCS PROCEDURES - Continued.
TABLE 2-3. Operator Preventive Maintenance Checks and Services
Location
Procedure
Item to be
Not Fully Mission
Interval
Item
Capable if:
Check/Service
Number
WARNING
The fuels used in this generator set
are highly explosive. DO NOT
smoke or use open flame when
performing maintenance. Flames
and explosion can occur resulting
in severe injury or death.
Inspect for loose, damaged, or missing Loose, damaged,
Engine
After
33
or missing hard-
hardware.
Assembly
ware.
Any fuel leaks,
Inspect for leaks, damage, loose, or
Fuel System
After
34
damage, loose or
missing hardware.
missing parts.
Any fuel leaks.
Inspect for leaks, cracks, damage,
Fuel Filter/
35
After
proper mounting, loose or missing parts.
Water
Separator
Water not drained.
Drain water.
Class III leaks,
Inspect for leaks, damage, loose or
Lubrication
36
After
damage, loose or
missing parts.
System
missing parts.
Oil level is low.
Inspect oil level.
Oil shows signs of
Inspect for contamination.
Cooling System
WARNING
Cooling system operates at high
temperatures. Personal injury or death
from burns or scalding can result from
contact with high pressure steam and/or
liquid.
Class III leaks or
Inspect for leaks, damage, loose or
Radiator
After
37
missing radiator
missing parts.
cap.
Class III leaks or
Hoses
Inspect for leaks, cracks, or missing
38
After
missing clamps or
parts.
hoses.
Broken or missing
Inspect for cracks, fraying, or
Fan Belt
After
39
belt.
looseness.
Control Box
Assembly
Damaged or mis-
Inspect for damaged or missing parts.
Controls and
After
40
ing parts.
Indicators
2-15/(2-16 blank)
