ARMY TM 9-6115-639-13
AIR FORCE TO 35C2-3-386-51
MARINE CORPS TM 10155A-13/1
4-32. SLAVE RECEPTACLE MAINTENANCE
This task covers removal, inspection, and installation.
INITIAL SETUP
Tools:
Equipment Condition:
Tool Kit, General Mechanics Automotive
Battery removed (Para. 4-44)
(Item 2, App. B, Sect. III)
A. REMOVAL.
1.
Unlock main access cover latches and lift cover to
open.
2.
Tag and disconnect electrical wiring from the rear
of SLAVE RECEPTACLE (1, Figure 4-23).
4.
Remove SLAVE RECEPTACLE (1) and attached
cap from generator set skid base by removing
screws (2), washers (3), and nuts (4).
B. INSPECTION.
1.
Inspect receptacle for corrosion, evidence of
electrical short, and obvious damage. Check
terminal connectors for damage.
2.
Inspect electrical wiring for cuts, crimps, bare
wire, or other damage. Ensure terminal lugs are
securely attached.
3.
Remove and replace any component that is
damaged to the extent that it will effect the safe
operation of the generator set.
Figure 4-23. SLAVE RECEPTACLE
4-64